Optimising Cell Formation: Impact of Formation Protocols on Cell Manufacturing Cost and Performance

Kenneth Nwanoro • November 17, 2026

About this technical paper

Formation can be made roughly 40% faster for about 6% cycle-life penalty.


Formation can be made roughly 40% faster for about 6% cycle-life penalty. the process, and it is the controlled electrochemical activation of battery cells. Cell formation represents a significant bottleneck in cell manufacturing, consuming up to 30% of total production time, a substantial portion of energy costs, costing up 15-32% of a cell’s conversion (non-material) cost, and a large initial capital investment for formation towers, floor space and storage facilities. Optimised protocols are reported to shorten formation time by 40-60%, worth an estimated £1.50 to £3.75 per kWh at pack level.



We tested that claim at the UK Battery Industrialisation Centre (UKBIC). Fourteen protocols, the standard protocol (F1) plus thirteen alternatives were run on 21700 NMC811/Gr-SiOx cells of 4.8 Ah nominal capacity. Each protocol-formed cell was then cycled at C/3 to 80% state of health.

The authors

Kenneth Nwanoro

Senior Modelling & Simulation Engineer

UKBIC

Ameir Mahgoub

Head of Product Engineering

UKBIC

Richard LeCain

CTO

UKBIC